Multidirectional MPI Equipment

Approx. Rs 1,65,500 / PieceGet Latest Price

Power sources are designed to use in rugged industrial atmosphere. Widely used for inspection of elements, castings, Engine blocks and service parts like crane hooks, truck forks etc.

Meets ASTM E 1444. Rev.16 requirements

FEATURES

•  Infinitely variable thyristorised magnetizing current control.

•  AC decay demagnetization facility.

•  Analog ammeter for displaying the magnetization Amps

•  Output terminals to connect magnetizing cables of prod method or cable wrap method.

•  Provision for remote control assembly.

•  Suitable for prod method, cable wrap method and coil methods.

•  Heavy duty handles for rugged industrial applications.

OPTIONAL ACCESSORIES:-

•  Magnetizing cables with prod method and cable wrap methods.

•  Validation test blocks.

•  C-clamp assembly

•  Scissor clamps.

•  Magnetic letch.

Approx. Rs 6,50,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: 4 weeks

Approx. Rs 75,000 / PieceGet Latest Price

GENERAL DESCRIPTION
The SUPERMAG Magnetic Pie Field Indicator, also known as a pie gauge, is a device used as an aid in determining the direction of magnetic field for detection of discontinuities in ferrous materials. It is an octagon shaped piece made with a low retentive steel surface having eight bonded slices, similar to pieces of pie. The octagon shaped piece is mounted on a handle so the inspector can place it on the part in the area being magnetized.
With an adequate amount of magnetizing current and proper particle application, the pie gauge will show indications in the same direction natural indications would appear.
INSTRUCTIONS
1. Place the pie gauge as flat as possible on the part with the pie section side down. Make sure it is in the area to be magnetized.
2. Apply the magnetic current while applying the magnetic particles using the continuous method.
3. If using dry particles, lightly blow off the excess while the magnetic current is still on.
4. Artificial indications will appear on the pie gauge in the same direction as the natural defects.
SPECIFICATIONS COMPLIANCE
ASTM E 709-08 (Section 20.8.5.1)
ASTM E 1444/E1444M-12 (Section 6.2.5, X5.1)
BPVC (Section V, Article 7: T-764.2 (a))

Approx. Rs 1,65,000 / PieceGet Latest Price

Power sources are designed to use in rugged industrial atmosphere. Widely used for inspection of elements, castings, Engine blocks and service parts like crane hooks, truck forks etc.

Meets ASTM E 1444. Rev.16 requirements

FEATURES

•  Infinitely variable thyristorised magnetizing current control.

•  AC decay demagnetization facility.

•  Analog ammeter for displaying the magnetization Amps

•  Output terminals to connect magnetizing cables of prod method or cable wrap method.

•  Provision for remote control assembly.

•  Suitable for prod method, cable wrap method and coil methods.

•  Heavy duty handles for rugged industrial applications.

OPTIONAL ACCESSORIES:-

•  Magnetizing cables with prod method and cable wrap methods.

•  Validation test blocks.

•  C-clamp assembly

•  Scissor clamps.

•  Magnetic letch.

Approx. Rs 7,50,000 / PieceGet Latest Price

Magnaflux magnetic particle inspection (MPI) testing equipment is designed to be fast, reliable and high-value. Versatile and durable for industrial environments, Magnaflux wet benches, magnetic yoke and power pack come in a range of outputs, including AC, half-wave DC and full-wave DC. Magnaflux MPI equipment can be sized for specific test parts and to accommodate almost any size part.

Approx. Rs 5,95,500 / PieceGet Latest Price

Power sources are designed to use in rugged industrial atmosphere. Widely used for inspection of elements, castings, Engine blocks and service parts like crane hooks, truck forks etc.
Meets ASTM E 1444. Rev.16 requirements
FEATURES
•  Infinitely variable thyristorised magnetizing current control.
•  AC decay demagnetization facility.
•  Analog ammeter for displaying the magnetization Amps
•  Output terminals to connect magnetizing cables of prod method or cable wrap method.
•  Provision for remote control assembly.
•  Suitable for prod method, cable wrap method and coil methods.
•  Heavy duty handles for rugged industrial applications.
SPECIFICATIONS
UNITS
SMP-1000A/1500A
SMP-2000A/3000A
• INPUT SUPPLY
•  FREQUENCY
•  PHASE
•  MAX.OUTPUT CURRENT AC/HWDC
•  DUTY CYCLE MAX O/P
•  OPEN CIRCUIT VOLTAGE
•  CLASS OF INSULATION
•  KVA RATING
•  LINE CURRENT
•  CURRENT CONTROL SYSTEM
•  AMMETER
•  DIMENSIONS
•  NET WEIGHT
•  PACKING WEIGHT
VOLTS
HZ
PH
AMPS
%
V
CLASS
KVA
AMPS
----
-----
MM
KGS
KGS
 
230/415
50/60
1Phase/2 LINES OF 3 PH
1000/1500
50
6.5
F
8/10
20/45
SCR CONTROL
ANALOG/DIGITAL
600X300X300
55
25
415
50/60
2 LINES OF 3 PH
2000/3000
50
8
F
12/13
45/55
SCR CONTROL
ANALOG/DIGITAL
600X300X300
60
25
 
OPTIONAL ACCESSORIES:-
•  Magnetizing cables with prod method and cable wrap methods.
•  Validation test blocks.
•  C-clamp assembly
•  Scissor clamps.

•  Magnetic letch.

Approx. Rs 1,35,500 / PieceGet Latest Price

Power sources are designed to use in rugged industrial atmosphere. Widely used for inspection of elements, castings, Engine blocks and service parts like crane hooks, truck forks etc.
Meets ASTM E 1444. Rev.16 requirements
FEATURES
  Infinitely variable thyristorised magnetizing current control.
  AC decay demagnetization facility.
  Analog ammeter for displaying the magnetization Amps
  Output terminals to connect magnetizing cables of prod method or cable wrap method.
  Provision for remote control assembly.
  Suitable for prod method, cable wrap method and coil methods.
  Heavy duty handles for rugged industrial applications.
SPECIFICATIONS
UNITS
SMP-1000A/1500A
SMP-2000A/3000A
 INPUT SUPPLY
  FREQUENCY
 PHASE
  MAX.OUTPUT CURRENT AC/HWDC
  DUTY CYCLE MAX O/P
  OPEN CIRCUIT VOLTAGE
  CLASS OF INSULATION
  KVA RATING
  LINE CURRENT
 CURRENT CONTROL SYSTEM
  AMMETER
  DIMENSIONS
  NET WEIGHT
 PACKING WEIGHT
VOLTS
HZ
PH
AMPS
%
V
CLASS
KVA
AMPS
----
-----
MM
KGS
KGS
 
230/415
50/60
1Phase/2 LINES OF 3 PH
1000/1500
50
6.5
F
8/10
20/45
SCR CONTROL
ANALOG/DIGITAL
600X300X300
55
25
415
50/60
2 LINES OF 3 PH
2000/3000
50
8
F
12/13
45/55
SCR CONTROL
ANALOG/DIGITAL
600X300X300
60
25
 
OPTIONAL ACCESSORIES:-
  Magnetizing cables with prod method and cable wrap methods.
 Validation test blocks.
  C-clamp assembly
  Scissor clamps.

 Magnetic letch.

Approx. Rs 3,95,500 / PieceGet Latest Price

FEATURES

·       Inputs supply 415V, 50Hz, and 2 Phase.

·       Line current 100 Amps

·       Maximum output of 3000 Amps AC

·       An-log Ammeter with reading facility

·       Fabricated body mounted on revolving caster wheels for easy mobilization.

·       Provision for cables from AC.

·       AC De-Mag facility

·       Infinitely variable thyristorised magnetizing current control.

·       Remote control pendent with 10 meter cable as sly.

·       Calibration Certificate.

·       Warranty Certificate.

STRUCTURE DETAILS

·       Weight 80kg

·       Length 650 mm

·       Height 450 mm

·       Width 550 mm

Approx. Rs 9,500 / PieceGet Latest Price

An MPI Testing Machine (Magnetic Particle Inspection machine) is a non-destructive testing (NDT) device specifically designed for performing Magnetic Particle Inspection on ferromagnetic materials such as steel and iron. These machines create a magnetic field in the test object, and magnetic particles are applied to detect surface and near-surface discontinuities like cracks, seams, laps, voids, and inclusions.