MPI Accessories

Approx. Rs 16,500 / PieceGet Latest Price

Approx. Rs 3,000 / UnitGet Latest Price

Under the supervision of our skilled professionals, we are able to fabricate and offer finest quality MPI Test Blocks with perfect finishing. High grade material and sophisticated technology is used in the production of these MPI Test Blocks. Our MPI Test Blocks are available at most reasonable rates with us only.

Specifications:

• Used for Yoke and Coil type Magnetization
• Used for Prod type Magnetization Meets BHEL requirements

Approx. Rs 1,500 / PieceGet Latest Price

 GENERAL DESCRIPTION

The SUPERMAG Magnetic Pie Field Indicator, also known as a pie gauge, is a device used as an aid in determining the direction of magnetic field for detection of discontinuities in ferrous materials. It is an octagon shaped piece made with a low retentive steel surface having eight bonded slices, similar to pieces of pie. The octagon shaped piece is mounted on a handle so the inspector can place it on the part in the area being magnetized.

With an adequate amount of magnetizing current and proper particle application, the pie gauge will show indications in the same direction natural indications would appear.

INSTRUCTIONS

1. Place the pie gauge as flat as possible on the part with the pie section side down. Make sure it is in the area to be magnetized.

2. Apply the magnetic current while applying the magnetic particles using the continuous method.

3. If using dry particles, lightly blow off the excess while the magnetic current is still on.

4. Artificial indications will appear on the pie gauge in the same direction as the natural defects.

SPECIFICATIONS COMPLIANCE

ASTM E 709-08 (Section 20.8.5.1)

ASTM E 1444/E1444M-12 (Section 6.2.5, X5.1)

BPVC (Section V, Article 7: T-764.2 (a))

Approx. Rs 3,500 / PieceGet Latest Price

Approx. Rs 800 / PieceGet Latest Price

Approx. Rs 12,500 / PieceGet Latest Price

Approx. Rs 9,500 / PieceGet Latest Price

Magnetic Particle Inspection (MPI) is a non-destructive testing (NDT) method used to detect surface and near-surface discontinuities (like cracks, porosity, laps, seams) in ferromagnetic materials (e.g., iron, steel, nickel, cobalt).

MPI inspection equipment is used to magnetize the test material and apply magnetic particles (either dry or suspended in a liquid) to identify flaws that cause leakage fields in the magnetic flux.

Approx. Rs 10,500 / PieceGet Latest Price

A Portable MPI Machine is an NDT (non-destructive testing) unit designed to be used in the field (not fixed bench). It magnetizes a ferromagnetic component (using AC, DC, or pulse modes), and then magnetic particles (dry or wet, fluorescent or visible) are applied to show cracks or discontinuities. Key things are portability, power, safety, and flexibility to handle different shapes/surfaces.

Approx. Rs 9,500 / PieceGet Latest Price